are available in various types and sizes and can be broadly classified into Motorcycle Battery Fasteners, Inverter Battery Fasteners and Industrial Battery Fasteners. These are available in sizes varying from M5 up to M12 and are made conforming to the relevant industry standards like IS, DIN, JIS etc. The material for construction varies from Mild Steel, Brass, Copper to SS302/304. These are supplied with various surface finishes like Lead, Tin, Nickel, Tin lead Alloy plating of different ratios or a combination of different metals or in plain passivated state. Plating thickness varies from 5 microns to 15 microns or as specified.

BATTERY CLIP CONNECTORS

are available in different sizes and vary according to the end usage. Clips are available from 10 amps up to 200 amps. These can be supplied with wires from 0.50 sq. mm to 35 sq.mm. These cables are insulated with either PVC or ELASTOMERIC RUBBER. The annealed copper core is available in BARE form or in TINNED condition. All these connectors are suitably insulated with polyolefin sleeves which have excellent dielectric breakdown threshold. Optionally a soft PVC molded sleeve is also provided to increase the insulation. The clips are of robust design with excellent tension and spring back and are plated with Tin, Lead Nickel or with a combination of different metals. Plating thickness varies from 15 microns to 25 microns or as specified

MOTORCYCLE BATTERY LEAD WIRES

Are available for 2.5 LC motorcycle batteries for both VRLA Batteries as well as for FLOODED CELLS. Lead wires for flooded cells are available with heat shrink sleeve at the soldering end thereby preventing wire corrosion and increasing the service life of the battery. For usage with VRLA Batteries the battery end of the wire is provided with an eyelet and can be fixed on to the battery by means of a fastener set. The terminal pins are insulated and protected with a soft PVC sleeve. The terminal pins are crimped on to the wires using state of the art crimping presses and can withstand the specified crimp force. Terminal pins used conform to the international specification and have excellent coupling force thereby preventing loose contacts. The terminals are either TIN or LEAD plated t prevent corrosion. Plating thickness varies from 6 to 8 microns or as specified.

SMALL VRLA BATTERY TERMINALS

are available for 4.5 Ah, 7 Ah, 10-12 Ah and 18-26 Ah range of VRLA Batteries as well as for the Ebike batteries. Terminals are manufactured to conform to the prevailing international specification and have excellent service life by virtue of the special plating process employed. The VRLA battery terminals terminals are manufactured using prime material (Virgin BRASS sheet) and the Ebike battery terminals are produced from prime copper material (EC Grade). The terminals are composite TIN plated to prevent corrosion during the formation process as well as during the entire service life of the battery. Plating thickness varies from 6 to 8 microns or as specified.

LEAD MOULDED CHARGING CONNECTORS

Are available for automotive batteries with tapered round pole. They conform to the universal specification of the poles in use and provide an excellent contact while charging. They are molded with prime lead and the ends suitable insulated with heat shrunk tubings. Available for both B type and D type poles.

JUMP START CABLES

Jumper cables are a must have in today's automobile as many of the cars critical functions rely on the battery for electrical power. Having a set of Jumper cables in your car enables you to jump start, also called a boost start your car from a healthy car when the vehicle's battery is discharged. This saves you the trouble and expense of calling a battery service technician to start your car when you are stuck in such a situation. A second battery (often in another vehicle) is temporarily connected to provide starting power to the disabled vehicle. Once the disabled vehicle's engine is running, its alternator should recharge the dead battery, so the second battery can now be disconnected.
Jumper cables consist of a pair of heavy guage insulated wires with alligator clips at each end. Jumper cables are available in various lengths fro 2.5 metres to 4 metres. The size of copper conductors in the cable varies from about 10 sq.mm for light duty sets, to 50 sq mm for heavy duty sets. The alligator clips generally have color-coded insulation to prevent electrical short circuits.Clips fit both top and side-mounted battery terminals. Clips are made from Mild Steel subsequently plated with Lead or Tin. These clips are of high strength and have excellent spring back thereby avoiding shorting due to loose contact.

FUSE ASSEMBLIES

Are available for Industrial Battery Banks form 120 Ah to 5000 Ah. Fuse ratings vary from 63 amps to 2500 Amps. These are of compact design and can be mounted on to the battery module itself thereby saving on valuable space.

RIGID INTER CONNECTORS

are available in Copper and Aluminium and are custom made to specification. Surface Finishes are of Lead, Tin and Tin-Lead alloy variants with the plating thickness ranging from 10 to 50 microns. Insulation variants include heat shrunk PVC or Poly Olefin Tubing.

FLEXIBLE CABLE CONNECTORS

are custom made to the desired specifications and are available in a wide variety of materials. Typical construction is from Copper or Aluminum cables sheathed with PVC or Elastomeric Rubber or as specified and are crimped with standard or customized cable ends. These cable ends are available in Copper, Brass or Aluminum with Tin, Lead or Silver Plating. Typical cross sections of cables start form 6.0 sq mm up to150 sq.mm. These cables can be used either during charging or to draw current from the battery.

CABLE ENDS, LUGS AND SOCKETS

are either available as standard or are custom made as per specification. These cable ends are available in Copper or Aluminium subsequently plated with either Tin, Lead ,Silver or with a combination of all. Plating thickness varies fro 15 microns to 75 microns or as specified.

BATTERY POLES, INSERTS AND THIMBLES

are available in Brass & Copper and are custom made to specification.Surface Finishes are of Lead, Tin and Tin-Lead alloy variants with the plating thickness ranging from 10 to 50 microns.

BATTERY CHARGING TRAYS AND DATALOGGING FACILITATORS

Charging Trays are used to charge small VRLA and Motorcycle batteries in a modular or tiered fashion. They are ideal for places where space is a constraint and almost 5 times the number of batteries can be charged in an area when compared to charging on the floor or on a fixed platform. These trays are accommodated on trolleys and facilitate easy movement. Trays are available with data logging facility.
Data logging facilitators act as a bridge between the battery bank being charged and the data logger of the charger. Once connected they provide a convenient way of transmitting data to the data logger thereby saving precious time and labor.